LAN cable tester plus (Model No.: mTDR-030)
NanoTronix LAN Cable Tester Plus (Model No.: mTDR-030) is a combination unit that utilizes MTDR(Metallic Time-Domain Reflectometry) technology used in measuring cable distance and TCP/IP protocol analyzer for examining internal conditions of LAN communication lines.
To improve the efficiency on LAN cable management, LAN Cable TesterPlus also has a pairing check function used for pinpointing the ill connection of LAN connectors (open, short, reversed, crossed and splitted) and a tone probing function used for tracing cable in the walls, floors and ceilings.
LAN Cable Tester Plus is ideally suited for work on installation of networks and for ongoing maintenance and service to any type of paired (shielded or twisted) metallic cables such as category 5/6 UTP cables, Telephone lines, Coaxial cables and LAN systems. Its' all-in-one testing capabilities meets the needs of every cable contractors, installers and technicians at lowest cost.
LAN Cable Tester Plus is housed in a rugged ABS enclosure designed to deliver water-resistant performance and provides technicians with the added convenience of being hand-held. It is powered by four AA(NEDA 15A or LR6) batteries, which are stored in a compartment on its back.

         Adobe Reader
  - Low cost numeric LAN Cable Tester
- High Resolution and High Accuracy
   > Resolution: 5cm (2 in)
   > Accuracy: ±1% of reading ±10cm (4 in)
- TCP/IP protocol analysis
   > Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol)
   > Service of assigning MAC address by itself
- LAN cable fault detection for open, shorted, crossed, split and reversed pair
- Overload voltage protection: displays "OUCH" alert message with sound when line voltage exceeds
- Built-in tone generator for cable tracing & identification (910 to 1100 Hz with 5V peak
- Auto fitting function for the various cable measurement
- Extra-large backlit (icon type 7 segment) LCD
- Easy-to-use test modules
- 20 additional library memory spaces for new VOP settings
- Low power consumption with long battery life : 5,000 tests
Height 235mm
Depth 44mm
Width 100mm
Net Weight 450g
Connector type RJ45 & BNC
LCD display Extra-large backlit(ICON type 7 segment) LCD
Measurable cable UTP Cable ( CAT 3, 4, 5, 5e & CAT 6 ),
Coaxial and Telephone cable
Measurement range 300m (984ft)
Minimum display resolution 5cm
Accuracy ±1% of reading ±10cm(4in)
TCP/IP protocol analysis Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol)
Service of assigning MAC address by itself
LAN pair check Open, Short, Crossed, Split, Reversed pair
Additional library 20 library memory spaces for new VOP settings
VOP Adjustable from 1.0% to 99.9%(in 0.1% step)
Tone Generation 1kHz, 5V pulse
Free inductive probe allows you to verify cable's continuity and
trace the cable in walls, floors and ceilings
Automatic power off 30minutes with no key touched
Automatic output impedaence 25,50,75,100,125 or 150Ω
Power Supply
Battery life
Approx. 5,000 tests
EMC BS/EN 61326-1
Safety Complies with IEC 61010-1
Operating temperature -18℃~60℃
Storage temperature -20℃~70℃
Humidity 85% at 35℃
  - UTP cable (CAT 3/4/5/5e/6)
- Telephone line and coaxial cable
- Any paired (shield or twisted) metallic telecom cable
NanoTronix LAN Cable Tester (Model No.: mTDR-020) is primarily designed for LAN installer, cable wholesalers, retailers, contractors, electricians, cable installers and alarm installers who need to troubleshoot and measure individual line faults (open and short), pairings, and their distances.

Standard Accessories
Optional Accessories
Standard Accessories
Soft carrying case
Alligator clip
IRJ45-RJ45 female coupler
RJ45 to RJ45 patch cabler
Female RJ45 to female BNC
 (Remote identifier #1 only)
Male BNC to Female RJ45 Adaptor
User's manual
     * AA battery pack is built into the instrument
Optional Accessories
Female RJ45 to female BNC
  - Remote Identifier #2
  - Remote Identifier #3
  - Remote Identifier #4
Inductive probe for tone generator