 |
| |
|
¹«Á¦ ¹®¼
|
|
 |
 |
 |
|
 |
 |
|
NanoTronix
LAN Cable Tester Plus (Model No.: mTDR-030) is
a combination unit that utilizes MTDR(Metallic
Time-Domain Reflectometry) technology used in
measuring cable distance and TCP/IP protocol analyzer
for examining internal conditions of LAN communication
lines.
To improve the efficiency on LAN cable management,
LAN Cable TesterPlus also has a pairing check
function used for pinpointing the ill connection
of LAN connectors (open, short, reversed, crossed
and splitted) and a tone probing function used
for tracing cable in the walls, floors and ceilings.
LAN Cable TesterPlus is ideally suited for work
on installation of networks and for ongoing maintenance
and service to any type of paired (shielded or
twisted) metallic cables such as category 5/6
UTP cables, Telephone lines, Coaxial cables and
LAN systems. Its' all-in-one testing capabilities
meets the needs of every cable contractors, installers
and technicians at lowest cost. |
|
|
| LAN
Cable TesterPlus is housed in a rugged ABS enclosure
designed to deliver water-resistant performance
and provides technicians with the added convenience
of being hand-held. It is powered by four AA(NEDA
15A or LR6) batteries, which are stored in a compartment
on its back. |
|
|
|
|
|
| |
|
 |
 |
Low cost
numeric LAN Cable Tester |
|
High Resolution
and High Accuracy |
| |
|
- Resolution:
5cm (2 in)
- Accuracy: ¡¾1% of reading ¡¾10cm (4 in) |
|
TCP/IP
protocol analysis |
| |
|
- Service of the environment
of static IP address or DHCP(Dynamic Host Configuration Protocol)
- Service of assigning MAC address by itself |
|
LAN cable
fault detection for open, shorted, crossed, split and reversed
pair |
|
Overload
voltage protection: displays "OUCH" alert message
with sound when line voltage exceeds 6.5V |
|
Built-in
tone generator for cable tracing & identification (910 to
1100 Hz with 5V peak to peak) |
|
Auto
fitting function for the various cable measurement |
|
Extra-large
backlit (icon type 7 segment) LCD |
|
Easy-to-use
test modules |
|
20 additional
library memory spaces for new VOP settings |
|
Low power
consumption with long battery life : 5,000 tests |
| |
|
|
| |
|
| |
 |
| |
| |
Dimensions
|
Height |
235mm |
Depth |
44mm |
Width |
100mm |
Net
Weight |
450g |
|
Interface |
Connector
type
|
RJ45
& BNC |
LCD
display |
Extra-large
backlit(ICON type 7 segment) LCD |
|
Performance |
Measurable
cable |
UTP
Cable ( CAT 3, 4, 5, 5e & CAT 6 ),
Coaxial and Telephone cable
|
Measurement
range |
600m
(2,000 ft) |
Minimum
display resolution |
5cm(2in) |
Accuracy
|
¡¾1% of reading ¡¾10cm(4in) |
TCP/IP
protocol analysis |
Service of the environment
of static IP address or DHCP(Dynamic Host Configuration
Protocol)
Service of assigning MAC address by itself |
| LAN pair check |
Open, Short, Crossed,
Split, Reversed pair |
| Additional library |
20 library memory
spaces for new VOP settings |
| VOP |
Adjustable from
1.0% to 99.9%(in 0.1% step) |
Tone Generation
|
1kHz, 5V pulse
Free inductive probe allows you to verify cable's continuity
and
trace the cable in walls, floors and ceilings |
| Automatic power
off |
30minutes with no
key touched |
| Automatic output
impedaence |
25,50,75,100,125
or 150¥Ø |
|
Power
Supply |
Battery |
4LR6(LR6) |
Battery
life |
Approx.
5,000 tests |
Safety
|
EMC
|
BS/EN
61326-1 |
Safety |
Complies
with IEC 61010-1 |
Environment |
Operating
temperature
|
-18¡ÆC
~ +60¡ÆC
|
Storage
temperature |
-20¡ÆC
~ 70¡ÆC |
Humidity |
85%
at 35¡ÆC |
|
| * Except where otherwise stated, this
specifications apply an ambient temperature of 20¡É(68¢µ) |
|
| |
| |
 |
| |
|
UTP cable (CAT 3/4/5/5e/6) |
|
Telephone line and coaxial cable |
|
Any paired (shield or twisted) metallic telecom
cable |
| |
NanoTronix LAN Cable Tester (Model
No.: mTDR-020) is primarily designed for LAN installer, cable
wholesalers, retailers, contractors, electricians, cable installers
and alarm installers who need to troubleshoot and measure individual
line faults (open and short), pairings, and their distances. |
|
| |
| |
 |
| |
|
Standard Accessories
|
 |
| ¨ç |
Soft carrying
case |
| ¨è |
Alligator
clip |
| ¨é |
Inductive
probe for tone generator |
| ¨ê |
RJ45-RJ45 female
coupler |
| ¨ë |
RJ45 to RJ45 patch
cable |
| ¨ì |
Female
RJ45 to female BNC
(Remote identifier #1 only) |
| |
| ¨í |
User's manual |
| |
*AA
battery pack is built into the instrument |
| |
LAN Cable Tester with Standard
Accessories |
| |
|
|
Optional Accessories |
 |
| ¨ç |
Female RJ45 to female
BNC |
| |
Remote
Identifier #2
Remote Identifier #3
Remote Identifier #4 |
| |
Optional Accessories for LAN
Cable Tester |
| |
|
| |
|
 |
|
| |
