¹«Á¦ ¹®¼­

 

 
The Combi TDR - mini OTDR + MTDR (Model No.:OMTDR-1000) for both optic fiber & metallic cable is a high-end instrument capable of identifying a wide range of cable faults using Time Domain Reflectometry, designed to meet today¡¯s most demanding network cabling problems.
Keeping to its traditional ways, the OMTDR-1000 displays the actual waveform or signature of the optic finer or metallic cable thereby enabling engineers and technicians to pinpoint any impedance changes along the optic fiber & metallic cable.
 

 

NanoTronix Combi TDR (Model No.: OMTDR-1000) is a compact and lightweight handheld Optical Time Domain Reflectometer (OTDR) with integrated Metallic Time Domain Reflectometer (MTDR) in one unit to be used for either optic fiber or metallic cable network
The OTDR mode can be used for analyzing the physical condition of optical fibers in the installation and maintenance of optical communication networks. It provides users with the complete information on the attenuation and reflective or non-reflective loss of optical fibers so as to locate faults, connectors and splices along the fibers.

The MTDR mode is suitable for installation, maintenance and fault-finding (complete open & short, partial open & short, loading coils, loose connection, broken lines etc.) of metallic cables such as CATV, CCTV, Coaxial cables, Power cable, Telephone line and UTP cable whatever consists of at least two conductors.

NanoTronix Combi TDR (Model No.: OMTDR-1000) will provide network installers and maintenance personnel with a complete solution for testing, troubleshooting, certifying and documenting the mixed network (especially LAN, CATV, HFC and FTTx networks) in any industrial sites.
 
 
Two in one OMTDR (mini OTDR + MTDR)
1310/1550nm
Realtime measurement
One button scan
6.4¡± TFT Color LCD display
Easy to use, Lightweight and compact
PC software for further analyzing, reporting and printing
Rugged and waterproof packing
Optional spare battery double operating time
Extremely economical multi purpose TDR for both optic cable and copper cable
 
 
Optical specifications Dynamic range 20dB
Measurement range 100km
Minimum display resolution 10cm Single-mode
Distance accuracy

Up to: ¡¾0.1% of reading ¡¾0.1m ¡¡
Over: ¡¾0.1% 0f reading
Attenuation detect accuracy ¡¾0.1dB
Event deadzone 15m
Pulse widths 50ns, 100ns, 200ns, 500ns, 1us, 2us, 5us, 10us
Average time 15s, 30s, 1min, 2min, 3min
IOR 1.0000 ~ 1.9999 (in 0.0001 step)
Wavelength 1310/1550
Fiber type Single-mode
Connector type FC/PC
Maximum data storage capacity 100 waveforms
Metallic Specifications Measurement range 3.2m ~ 20,000m (10.4ft ~ 65,000ft) for Coax
Minimum display resolution 10cm
Distance accuracy ¡¾0.1% of reading ¡¾0.1m for Coax
Pulse width 5ns,15ns,45ns,100ns,200ns,500ns, 1§Á, 2§Á, 5§Á,10§Á
Input bandwidth 300§Ö
Effective sampling rate 1GS/s
VOP(PVF) Variable from 30.0 to 99.9% (in 0.1% steps)
V : 90 to 300m/us
V/2 : 45 to 150m/us
Output impedance Automatic output impedence control of 25 ,50, 75, 100, 125 & 150 §Ù
Gain 0 to 66dB or better, maximum sensitivity 1mV (full scale)
Test Mode L1, L1&M, L1-M, M
Connector type BNC female
Maximum data storage capacity 100 waveforms
General Specifications Display Type 64" Color TFT LCD
Internal Memory 4MB
Communication port
 RS-232C compatible (1 start bit, 8 data bits, 1 stop bit and no parity and 115, 400 baud rate)
Power Supply 7.6V, Li-ion chargeable battery pack 8,800mAh / AC adapter
Battery Life 7 hours (extendable up to 14 hours by using extra spare battery)
Recharge time
7 hours
Adaptor intput Voltage : AC 110 ~ 240V (auto adjusting)
Frequency : 50/60Hz (auto adjusting)
Adaptor output
 Voltage : DC 15V (+5%)
Current : Max.1A
Operating Temperature -10¡É(+14¡ÆF) ~ +50 ¡É(122¡ÆF)
Storage Temperature -20¡É(-4¡ÆF) ~ +70 ¡É(158¡ÆF)
Relative Humidity <95%
Net Weight 2.7§¸(5.9lbs)
Dimensions 267mm(10.5") x 247mm(9.7") x 127mm(5")
* Except where otherwise stated, this specifications apply an ambient temperature of 20¡É(68¢µ).