LAN cable tester

LAN cable tester plus (Model.No.: mTDR-030)

NanoTronix LAN Cable Tester Plus (Model No.: mTDR-030) is a combination unit that utilizes MTDR(Metallic Time-Domain Reflectometry) technology used in measuring cable distance and TCP/IP protocol analyzer for examining internal conditions of LAN communication lines.
To improve the efficiency on LAN cable management, LAN Cable TesterPlus also has a pairing check function used for pinpointing the ill connection of LAN connectors (open, short, reversed, crossed and splitted) and a tone probing function used for tracing cable in the walls, floors and ceilings.
LAN Cable TesterPlus is ideally suited for work on installation of networks and for ongoing maintenance and service to any type of paired (shielded or twisted) metallic cables such as category 5/6 UTP cables, Telephone lines, Coaxial cables and LAN systems. Its' all-in-one testing capabilities meets the needs of every cable contractors, installers and technicians at lowest cost.
LAN Cable TesterPlus is housed in a rugged ABS enclosure designed to deliver water-resistant performance and provides technicians with the added convenience of being hand-held. It is powered by four AA(NEDA 15A or LR6) batteries, which are stored in a compartment on its back.

Features

	Low cost numeric LAN Cable Tester
	High Resolution and High Accuracy
		- Resolution: 5cm (2 in) - Accuracy: ±1% of reading ±10cm (4 in)
	TCP/IP protocol analysis
		- Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol) - Service of assigning MAC address by itself
	LAN cable fault detection for open, shorted, crossed, split and reversed pair
	Overload voltage protection: displays "OUCH" alert message with sound when line voltage exceeds 6.5V
	Built-in tone generator for cable tracing & identification (910 to 1100 Hz with 5V peak to peak)
	Auto fitting function for the various cable measurement
	Extra-large backlit (icon type 7 segment) LCD
	Easy-to-use test modules
	20 additional library memory spaces for new VOP settings
	Low power consumption with long battery life : 5,000 tests

Specifications

Dimensions	Height	235mm
	Depth	44mm
	Width	100mm
	Net Weight	450g
Interface	Connector type	RJ45 & BNC
Interface	LCD display	Extra-large backlit(ICON type 7 segment) LCD
Performance	Measurable cable	UTP Cable ( CAT 3, 4, 5, 5e & CAT 6 ), Coaxial and Telephone cable
	Measurement range	300m (984ft)
	Minimum display resolution	5cm
	Accuracy	±1% of reading ±10cm(4in)
	TCP/IP protocol analysis	Service of the environment of static IP address or DHCP(Dynamic Host Configuration Protocol) Service of assigning MAC address by itself
	LAN pair check	Open, Short, Crossed, Split, Reversed pair
	Additional library	20 library memory spaces for new VOP settings
	VOP	Adjustable from 1.0% to 99.9%(in 0.1% step)
	Tone Generation	1kHz, 5V pulse Free inductive probe allows you to verify cable's continuity and trace the cable in walls, floors and ceilings
	Automatic power off	30minutes with no key touched
	Automatic output impedaence	25,50,75,100,125 or 150Ω
Power Supply	Battery	4LR6(LR6)
Power Supply	Battery life	Approx. 5,000 tests
Safety	EMC	BS/EN 61326-1
Safety	Safety	Complies with IEC 61010-1
Environment	Operating temperature	-18℃~60℃
	Storage temperature	-20℃~70℃
	Humidity	85% at 35℃

Applications

		UTP cable (CAT 3/4/5/5e/6)
		Telephone line and coaxial cable
		Any paired (shield or twisted) metallic telecom cable

	NanoTronix LAN Cable Tester (Model No.: mTDR-020) is primarily designed for LAN installer, cable wholesalers, retailers, contractors, electricians, cable installers and alarm installers who need to troubleshoot and measure individual line faults (open and short), pairings, and their distances.

Accessories


Standard Accessories
①	Soft carrying case
②	Alligator clip
③	IRJ45-RJ45 female coupler
④	RJ45 to RJ45 patch cabler
⑤	Female RJ45 to female BNC (Remote identifier #1 only)
	Female RJ45 to female BNC (Remote identifier #1 only)
⑥	Male BNC to Female RJ45 Adaptor
⑦	User's manual
* AA battery pack is built into the instrument



		LAN Cable Tester with Standard Accessories



Optional Accessories
①	Female RJ45 to female BNC
	- Remote Identifier #2
	- Remote Identifier #3
	- Remote Identifier #4
②	Inductive probe for tone generator

		Optional Accessories for LAN Cable Tester